The apps that I had published on my remote desktop gateway is still asking for a password when i try to access it even though i have successfully authenticated on the remote gateway.
My setup is that the everything is installed on server1 while the session host is on server2 (app that is published is also on this server2)
I have tried to setup "Always prompt for a password upon connection" to disabled on both server1 and server2, however it is still the same.
hi all,
Win server 2016 connection brokers, 2012 R2 session hosts (due to application requirements), currently 154 session hosts in farm.
if i logon to specific session host, using mstsc.exe /admin, first logon time is approx 8 seconds. Subsequent logons are approx 3 seconds.
if i logon via the farm ()via rdweb, or an rdp file downloaded via RDWweb), the logon times are 18 seconds and 13 seconds respectively.
It seems to me as if the farm negotiation and deciding where to place the client is taking a full 10 seconds - which just ruins the user experience.
i havent been able to find anything by googling this - has anyone got some suggestions as to what to check or what tools i can use to troubleshoot this ?
Hi,
We want to use RDP for connecting to remote machine, execute Desktop Application Automation there. The challenge that we face is that on the customer end there are restrictions on idle timeout in RDP session. Once we start executing the automated desktop application and if execution takes longer that than the idle timeout to execute, the remote desktop session ends, and the Desktop Automation fails. Is there a way to handle this?
1. I have tried TSCON, but TSCON unlocks the console session, so it may not be acceptable to customers.
2. I have also tried Java's Robot classes to do some mouse action(https://stackoverflow.com/
Is it possible to keep the RDP session from disconnecting on Idle Timeout?
Thanks in Advance.
Best,
Sumit
I have a asus laptop which was experiencing issues when signing into the admin account. It would just sign me into a temporary account and a error would pop up saying "We cant sign into your account".
But after a few restarts I managed to sign into the admin account but it was all wrong, my usual desktop icons were gone all my local files are now in the wrong place. All my documents are still accessible but I have to navigate through the c drive to the
user. I also noticed in registry editor that the Profileimagepath for the account was a temporary path but I'm sure that's wrong and it should be the profile user name. Im not sure whats gone wrong here but any solution to this problem would be very helpful!
Hello all,
We have a RemoteApp environment with a Remote Desktop Gateway running on Server 2008 R2. All of our Windows 10 clients running any version PRIOR to 1703 can connect just fine. However, after 1703 is applied, they can no longer connect. They get this error:
"Your Computer can't connect to the remote computer because a security package error occurred in the transport layer..."
I have found others having this same issue: https://remotedesktop.uservoice.com/forums/266795-remote-desktop-services/suggestions/18937990-windows-10-1703-unable-to-connect-via-remote-des
Is there any workaround with this? We have a large RemoteApp terminal services environment, and as our remote users get upgraded to 1703, they are one by one unable to connect.
Thank you for the help!
RTS
++ 2008R2 Environment.
++ Installed Session host role, RDGW role and RD WEB access role on one server
++ Customer is accessing third part application via RD Gateway.
++ Customer has public certificate XYZ.COM but the internal domain is different i.e. XYZ.local
++ RD Gateway is configured on the SSL certificate name.(XYZ.COM)
++ Customer created the Forward lookup zone within DNS with the name XYZ.COM and created the host records.
++ Customer has published third party applications to access them via RD Gateway instead from RDweb.
++ I checked from DC customer is able to ping the Gateway server and able to access the third party application.
++ But from client machine which are in same Network unable to ping RD Gateway and unable to access third party application along with mstsc.
Error Message:
Your computer can't connect to the remote computer because the Remote Desktop Gateway server is temporarily unavailable. Contact your network administrator for assistance.
Could any one please suggest on the above issue...
A few users are experiencing this problem.
Event ID: 5973
Activation of app Microsoft.Windows.Cortana_cw5n1h2txyewy!CortanaUI failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational log for additional information.
And event ID: 1000
Faulting application name: ShellExperienceHost.exe, version: 10.0.14393.2125, time stamp: 0x5a990817
Faulting module name: Windows.UI.Xaml.dll, version: 10.0.14393.2125, time stamp: 0x5a9909e5
Exception code: 0xc000027b
Fault offset: 0x00000000006d710b
Faulting process id: 0x6b78
Faulting application start time: 0x01d3c1fbf1890ced
Faulting application path: C:\Windows\SystemApps\ShellExperienceHost_cw5n1h2txyewy\ShellExperienceHost.exe
Faulting module path: C:\Windows\System32\Windows.UI.Xaml.dll
Report Id: 7c1dae0b-eec7-416c-b5c9-5148b1bc7ba6
Faulting package full name: Microsoft.Windows.ShellExperienceHost_10.0.14393.2068_neutral_neutral_cw5n1h2txyewy
Faulting package-relative application ID: App
When this happens the start menu will not work. This corresponds with me enabling the roaming of C:\Users\user\AppData\Local
I'm wondering if there is a folder I should exclude from roaming.
If it's not being caused by roaming the local folder then it may be caused by some GPO settings I also changed. I did this because windows search was out of control and consuming too many resources. Unfortunately I cannot disable search completely because of Outlook. My discussion on Outlook and search I had to re enable indexing outlook.
Any guidance on this is appreciated.
So far the only fix I've come up with is temporary, which is to delete the local profile and on the next login the start menu works. After a day or 2 it stops working again. I haven't totally recreated the user profile and I'm hoping this is not the ultimate fix because that would be a PITA to have to do that for all the users that have this happen.
we have RDS installed in Windows 2016 standard edition and use session-base desktop deployment.
It was working fine for about one year. About two weeks ago, we started to have the following issue:
This computer can't connect to the remote computer.
The two computers couldn't connect in the amount of time allotted. Try connecting again. If the problem continues, contact your network administrator or technical support.
When this issue happens, we find some users are disconnected in the RDS-Collections-QuickSessionCollection. But we cannot log/sign off those users, they are always showing there.
BTW, we can sign of those users in the Task Manager-Users.
We can solve this issue by restarting the server. How to fix it without restarting the server?
Thanks!
Atradius
Hello Team,
Below is my environment details.
I have purchased 30 per user licenses. I have successfully activated the licensing server. Installed the licenses. Applied the correct group policy settings. But the issue is " the licensing manager shows Incorrect cals and none of the cals are getting issued when the users are connecting. When I run the license report, it says no licenses are issued.
Ideally it should show 30 available per user licensing cals. Instead it displays 500 available cals. My doubt is, however, its showing 500 available cals, why it is not issuing none of them.
I want correct data to be shown on the server i.e 30 available cals.
Any kind of help is much appreciated.
Thanks
Shravan
I need to stop Local devices and resources (Drive access) for only one user in remote desktop connection , I can enable/disable it for all users but I don't know how to activate it for one user.
<big>There is a problem with this website's security certificate </big>
| The security certificate presented by this website has errors and should not be trusted. |
| Security certificate problems may indicate an attempt to fool you or to intercept data that you send to the server. |
| We recommend that you do not continue to this website. |
| If you decide to trust 'appstore.gard.local:443', in spite of our recommendation, it will be temporarily allowed for this session. |
Hi
I want to change the date format for RDP users for just one VM. I have created the policy and did the f5 trick as per this post
https://theezitguy.wordpress.com/2014/08/07/group-policy-use-regional-settings-to-change-date-format/
but still the date format is correct when i RDP.
Under scope - security filtering of the GPO i have entered my own username as well as the VM name in question, any idea why the settings isnt taking effect ?
Hi,
I would want to install RDS Licences User CALs for a windows server 2012 r2.
Is it a must to have Active Directory to effect this or I can install without the need for the AD?
Much appreciate the assistance/advise.
Server 2012 R2
Basically i have 2 problems related to each other.
When people connecting to terminal server, and then some become idle, and some are really working (i see "a dot" or numbers), after several minutes the idle list resetting for everyone!
This cause me another problem that lots of idle stay connected and not disconnected from server and then the RDP connection to the terminal server takes lots of time and even failed sometimes due to timeout.
Hi guys,
On a random base (daily, weekly) we're experiencing major log-in problems on our Windows Server 2012 R2 Remote Desktop Services farm. The VM's are hosted on Hyper-V 2008 hosts and we're not using Citrix techniques etc.
Users are reporting that they cannot log-in, the log-in sessions hangs with a blank screen when loading their user profile (e.g. Please Wait For The User Profile Service).
In the System event log of the server on which the user is logging on the following errors are shown:
Source: Service Control Manager
Date: 23-12-2014 7:28:01
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
…and after 30 (or sometimes 60) seconds, the same error only another service (in random order):
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
…and after exactly 30 seconds, the same error only another service:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxmSms service.
etcetera, with the following errors:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndPointBuilder service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
The Portable Device Enumerator Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the TrkWks service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
These errors are logged continuously.
An administrator cannot solve this since he isn't able to login in as well (console or remotely), only a hard reset of the VM is possible to use the affected server again.
I took different steps to solve this problem without any success, like:
- Installing the latest Windows updates
- Removed unnecessary printer drivers, print monitors and print processors (no local printers/drivers are installed, only Remote Desktop Easy Printer driver is used)
- Searched different forum posts, but found only hotfixes for Windows Server 2008 R2.
Can someone please help me with this annoying problem?
Many thanks!!
EDIT:
Of course is increasing the time-out not really an option here... http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx
Hi folks,
I am dealing with weird issue on my Windows Server 2012 R2 server. Server is used as DC and RDS server.
Everything was working fine until Friday where I saw this problem first time.
Users reported that they are unable to log on to RDP - they see black screen only. User with active RDP connection are able to work but unable to log off from RDP. In server console I see that RDS is not working properly. I am able to restart all RDS services except this one - UmRdpService.
And there are some errors in event viewer.
13:05:13 Source - System, Service control manager - event ID 7011 - service UmRdpService timeout.
And then another:
The same source and event id but service is different - hidserv, Netman, ScDeviceEnum, transaction SysMain
and the last one - event id 7046 - UmRdpService
There is another error in app event viewer.
13:00:13 - App - Application Hang - event id 1002 - program StwPh.exe verze 5.1.12103.2 stopped cooperate with OS
I would say that problem is caused by app - STWPh.exe.
What do you mean?
Thanks.
Jendislav
Hey Together,
we have a customer with a RDS Terminalserver Farm with 4 2016 RDS Session Hosts located in Azure.
The customer is facing the issue that the desktop icons are flashing, like they are pressing f5 all the time.
Already tried the specific registry key here:
https://community.spiceworks.com/topic/1978620-rds-2016-desktop-icons-flickers-refreshes. that either did not work.
In addition the users are experiencing that the cursor sometimes start to randomly juming around.
For example, user is typing in the adress field of outlook, and the cursor jumps out of that field and the user has to click in it again to finish typing.
Probably the issue is related to the flickering and refreshing desktop, but not sure.
Best Regards,
Dominic
